How do I turn off the maintenance required light on my Honda?

How do I turn off the maintenance required light on my Honda?

To reset the maintenance required indicator, turn the ignition switch to the LOCK position, then press and hold the trip meter reset button until the indicator resets.

How do I reset my Honda service reminder?

This method should work on any Honda trim model that has a touch screen with a home screen.

  1. Press home.
  2. Select settings.
  3. Press vehicle settings.
  4. Scroll down to maintenance info and press it to select it.
  5. Press reset.
  6. A screen will pop up asking if you really want to reset it or cancel. press reset and that should do it.

How do you reset the maintenance required light on a Honda?

How do I reset the maintenance light on a 2004 civic?

If the lights are on, the MAINT REQ’D light will not reset. If your Civic is equipped with daytime running lights (DRL), the DRL must be disabled so the MAINT REQ’D light can be reset. Turn the ignition switch to the OFF position. Press and hold the SELECT/RESET button.

How do I reset the DRL light on a Honda Civic?

If your Civic is equipped with daytime running lights (DRL), the DRL must be disabled so the MAINT REQ’D light can be reset. Turn the ignition switch to the OFF position. Press and hold the SELECT/RESET button. NOTE: See bottom photo for location of the SELECT/RESET button.

How do I reset the maintenance oil light on my Honda?

How to reset maintenance oil service light Honda Civic. From years: 2001, 2002, 2003, 2004, 2005. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting). . Hold the button for at least 10 seconds, until the indicator resets.

How do I reset the maint REQ’D light?

Press and hold the SELECT/RESET button. NOTE: See bottom photo for location of the SELECT/RESET button. While holding the button down, turn the ignition switch to the ON position (but without cranking or starting the engine). Hold the SELECT/RESET button for about 10 seconds. After 10 seconds, the MAINT REQ’D light will reset and turn off.