Why does my Blu-Ray DVD have no sound?

Why does my Blu-Ray DVD have no sound?

Check the TV’s sound output mode to ensure the internal speakers are set to ON and that the volume is not muted. Try to unplug the Blu-ray Player, then plug it back in again. Test the A/V cable on a different device, or try to use a known working cable on this Blu-ray Player. If the issue persists, Scedule a Repair.

Why is there no sound when playing DVD?

Ensure the disc is inserted into the DVD player correctly. Ensure the audio cables from the DVD player are connected properly to the television or stereo receiver. Try playing a different audio source through the television or receiver. Connect the DVD player to a different audio input on the television or receiver.

How do I get sound from my Blu-Ray player?

The easiest way to access audio from a Blu-ray Disc player is to connect the player’s HDMI output to an HDMI-equipped TV. Since the HDMI cable carries both the audio and video signal to the TV, you can access audio from a Blu-ray Disc.

Can Blu-Ray players play DVD audio?

Standard DVD resolution is 480p, far less than the 1080p resolution supported by HD and UHD (4K) Blu-ray players. All Blu-ray Disc players can also play CDs. Some players may also play HDCD, SACD, and DVD-Audio, as well as writable discs like CD-R/RW.

Why is there no sound from my Samsung Blu-ray player?

Turn the Blu-ray Disc player off and on again. NOTE: This normally resolves playback issues with MPEG2 PS files. If the volume is very low, select the Audio DRC or BD Audio Mix of the Blu-ray Disc player to Off . Set the BD Audio Mix setting of the Blu-ray player to On if there is no sound once the movie started.

How do I get the sound to play on my TV from a DVD?

Connect your Blu-ray player to your TV using an HDMI cable. This will transmit both the video and the audio to your TV with one cable. Connect the AUDIO OUT ports on your DVD player to the AUDIO IN ports on your TV with standard audio cables (red and white jacks).

Why is audio not working through HDMI?

Disconnect the HDMI cable from the HDMI input of the TV and connect the source device to a different TV. If there is still no sound, perform a power reset on the TV . If there is still no sound after power resetting the TV, replace the HDMI cable. Perform a factory reset .

Why won’t my Samsung Blu Ray player play sound?

Can a Blu-Ray player play SACD?

Super Audio CD (SACD) discs are not supported for playback. However, the Blu-ray Disc® player can play the CD layer of the hybrid disc.

How do I get the sound to play on my TV from my DVD player?

Connect the AUDIO OUT ports on your DVD player to the AUDIO IN ports on your TV with standard audio cables (red and white jacks). Connect the AUDIO OUT ports on your TV to your speakers using a standard audio cable, or a Digital Audio (Optical) cable.