How do you fix low beam headlights not working?

How do you fix low beam headlights not working?

4 Steps to Fix a Low Beam Headlight Bulb

  1. Find the blown out bulb.
  2. Buy the replacement bulb.
  3. Get your tools ready.
  4. Disconnect the negative terminal on the battery.
  5. Remove the trim pieces.
  6. Find the headlight holder.
  7. Disconnect the cables from the headlight.
  8. Remove the headlight bulb from the bulb housing.

Where is the headlight relay on a 2012 Ram 1500?

The 2012 Dodge Ram is equipped with two fuse boxes. The one that contains the fuse for the headlight is in the engine compartment. If You’re standing at the front of the vehicle and looking in the compartment, it will be on the driver’s side, directly in front of the battery.

Where is the headlight fuse on a 2014 Ram 1500?

The 2014 dodge ram 1500 headlight fuse is located in the underhood fuse box next to the battery.

Why would both low beam headlights go out?

Most total headlight failures are caused by a bad component like a fuse, relay, or module. Wiring problems can also cause both headlights to stop working. The cause: A burned out bulb, or a problem with the high beam switch or relay. The fix: Replace the bulb, switch, or relay.

What would cause low beam headlights not to work?

The likely cause is a fuse, headlight relay, headlight switch, dimmer switch or a wiring fault. About the only cause that is an easy fix is a blown fuse. Consult your owner’s manual to locate the main fuse for the headlight circuit and replace that fuse with one having the same amp rating.

Which fuse is for the headlights on a 2015 Ram 1500?

The headlight fuse for your 2015 dodge 1500 will be in the engine bay on the passenger side.

How many fuse boxes does a Dodge Ram have?

The 2018 Dodge Ram 1500 is equipped with two fuse boxes. Both should feature fuse and/or relay diagrams on the underside of the storage cover.

What do you do when both headlights go out?

If your headlights suddenly go out, do the following:

  1. First, try your dimmer switch. Often that will turn them back on again.
  2. Try the headlight switch a few times.
  3. Pull off the road as soon as you can and leave your hazard lights on so that other cars can see you.

What happens when a headlight relay goes bad?

A headlight relay will typically fail in the open position, preventing voltage from reaching the headlights. If the low beam relay fails, the low beams won’t work. Likewise, if the high beam relay fails, the high beams won’t work, and if the daytime running light (DRL) relay fails, the DRLs won’t work.

What causes both headlights to stop working?

Solution: If both headlights aren’t working, it’s unlikely that a bulb is at fault. The likely cause is a fuse, headlight relay, headlight switch, dimmer switch or a wiring fault. About the only cause that is an easy fix is a blown fuse.

How bad are the headlights on a Dodge Ram?

The headlights, both high and low beams, are so poor as to be a serious safety hazard. On low beam, the road is lighted for only 100 or so feet. On high beams, almost nothing ahead is visible. Similar experiences have been expressed by other ram pickup owners.

Why do my headlights turn on but not my low beams?

Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams. 1. Headlight Bulbs This is the most common reason we see for why a car’s high beam headlights work but the low beams don’t.

What to do when your low beams are not working?

The bulbs are the first things to check when your low beams not working. The reasons are simple. When you turn on the headlights, it’s almost always the low beam lights. High beams are required only on some specific occasions. So, normal headlights burn out quicker than the high beams lights.

Why do my low beams burn out more often than high beams?

The normal headlights are on far more often than the high beams, so the low beams burn out more frequently. Some vehicles have entirely different bulbs for the high beams, and other models have headlights with two different filaments. Either way, if your low beams aren’t working but your high beams are, the first things we check are the bulbs.