Blog 

What is Expo cleaner made of?

Author

What is Expo cleaner made of?

General Information
Manufacturer Newell Brands
Material Isopropyl Alcohol
Ethylene Glycol Monobutyl Ether (EGBE)
Miscellaneous

What chemicals are in Expo markers?

Three main chemicals are found in dry erase markers: SD alcohol-40, isopropanol and resin.

  • SD Alcohol-40. Specially denatured alcohol-40 is a form of ethyl alcohol, or ethanol.
  • Isopropanol. Isopropanol, also known as isopropyl alcohol, is another chemical found in dry-erase markers.
  • Resin.

Can you drink Expo whiteboard care?

GET MEDICAL ATTENTION AT ONCE. INHALE: MOVE EXPOSED PERSON TO FRESH AIR IF IRRITATION PERSISTS, GET MEDICAL ATTENTION PROMPTLY. INGEST: IF THIS PRODUCT IS SWALLOWED, DO NOT INDUCE VOMITING. IF VICTIM IS CONSCIOUS GIVE PLENTY OF WATER TO DRINK.

How do you make Expo spray?

Simply mix one part water and one part alcohol in a spray bottle, squirt some on the board and rinse with a soft, damp cloth. If you need a little extra cleaning power, use the alcohol at full potency rather than diluting it with water.

How are expo markers made?

Permanent markers commonly use an acrylic polymer in their ink, which helps the marker stick to the writing surface. The polymer, in addition to the solvent and pigments, is then mixed to form the ink of the marker. Dry erase markers utilize an oily silicone polymer to prevent the ink from sticking.

Is Expo cleaner soluble in water?

Solubility in water : Not available. Hazardous decomposition products Conditions to avoid No specific data. Under normal conditions of storage and use, hazardous decomposition products should not be produced. The product is stable.

Do expo markers expire?

When not in use, EXPO markers stored horizontally with caps installed tightly will last approximately 2-3 years. Yes, depending on the extent of solvent loss, the markers can often be restored. Place the cap back on the marker tightly and store tip down for 24 hours. The marker should revive.

What is whiteboard made of?

Today, high-quality whiteboards are usually made of porcelain- or enamel-coated steel, aluminum or hard coated durable films laminated onto a rigid surface which can provide a cost effective, easily customized finish. These materials provide high visibility and virtually no staining, even after years of use.