What height should sockets be off the floor?

What height should sockets be off the floor?

Sockets need to be installed at least 450mm up from the floor level of a room. TV points, telephone points, doorbells and light switches should be a max height of 1200mm from the floor.

Why do plug sockets have to be a certain height?

– If it were a brand new house then the building regulations specify a height for sockets and light switches so that the house can be both suitable for able bodied and disabled persons.

What is the minimum height for electrical outlets?

Electrical receptacle outlets on branch circuits of 30 amperes or less and communication system receptacles shall be located no more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom of the receptacle outlet box to the level of the …

What is the height of a disabled light switch?

Switches for permanently wired appliances (e.g. fused spurs or reset switches for alarm calls) should be mounted within the range between 750mm and 1200mm (see figure below). Meters should be mounted between 1200mm and 1400mm from the floor so that the readings can be viewed by a person standing or sitting.

How high should sockets be above skirting?

I always put the sockets on rewires at 2 to 3 inches above the exiting height of the skirting boards.

How high should sockets be above kitchen worktop?

The standard height of a worktop from the floor to the worktop surface is 910mm. The general rule is to then set your sockets 150mm above this (measured from the worktop surface to the bottom of the socket). Added together, this means the standard socket height is 1060mm from the floor to the bottom of the socket.

How high should sockets be above worktop?

What is code for installing electrical outlets?

210.52
The US National Electrical Code, Section 210.52, states that there should be an electrical outlet in every kitchen, bedroom, living room, family room, and any other room that has dedicated living space. They must be positioned at least every twelve feet measured along the floor line.

What is the standard height for electrical wall switches?

48 inches
For a majority of rooms, builders tend to place the bottoms of light switches 48 inches above the floor. This is a comfortable height for most home dwellers when sitting or standing, plus it makes it easier to install switches during construction.

Do light switches have to be a certain height?

So what height do light switches have to be in a home? For a majority of rooms, builders tend to place the bottoms of light switches 48 inches above the floor. Although 48 inches is the standard height electricians prefer for most rooms, this can be altered if local building codes permit.

Where should sockets be placed in a room?

Allow for a socket in each corner of the bedroom for other electrical items such as the TV, computers, lamps and other electrical items. If you have a dressing table or desks it’s worth adding sockets close to them for easy access and avoid running cables across the room.

What height do electrical sockets need to be above the floor?

What Height for Electrical Sockets and Switches (habitable areas) For new build properties: any sockets need to be at least 450mm up from the actual floor level of a given room. As for TV points, telephone outlets, doorbells and light switches: these need to be at a max height of 1200mm from the floor.

What is the standard height of an electrical outlet?

For the disabled and elderly, 15 inches above the top of the floor covering is usually considered the lowest standard height. Individually measuring each outlet height with a tape measure is one way to set outlet heights.

Why is there a height limit on sockets in sockets?

That height is for people who when standing have trouble bending down to reach lower sockets, such as the elderly etc. Often wheelchair users have less trouble reaching lower sockets than other people, as they are lower down to start with. I would advise you ask the Council to provide a specification.

How much clearance do you need around an electrical socket?

Where socket outlets are positioned above work surfaces or other obstructions, there needs to be sufficient clearance to minimise risk of damage to the cable etc. Although no distance is defined, a clearance of 15cm below the socket is recommended as a minimum (see below).