What happens if you put a freshwater boat in saltwater?

What happens if you put a freshwater boat in saltwater?

The short answer is yes; you can use a freshwater boat in saltwater and vice versa. Because freshwater boats aren’t designed to resist corrosion, you’ll have to really clean your boat after each use. Rinse the saltwater off the deck and hull and flush out your engines every time you get back to the dock.

Can any boat go in saltwater?

For the most part, freshwater boats can be used in saltwater. However, boat owners need to be aware of the increased potential for corrosion. Saltwater boats are designed to handle the more rigorous conditions that come with saltwater, so they should be fine to handle freshwater.

Can you run a freshwater boat motor in saltwater?

Outboard Motors So even if you have an outboard motor for freshwater use, you can simply switch it for saltwater. What you can do is to replace the magnesium anode of your engine with zinc or aluminum. This would greatly help in minimizing the dire effects of corrosion from salt. This isn’t the only factor to consider.

Does salt water damage fiberglass boats?

The fiberglass on the hull of your boat is more likely to fade faster and develop scratches in saltwater compared to a boat left in freshwater. The salt could be extremely damaging to the metals and electrical wiring of a boat. Keep these wires as dry as possible and reseal them as needed.

Are inboard motors bad for saltwater?

It doesn’t matter what propels your boat — inboard, outboard, I/O, jet drive — nothing on your boat that comes in contact with saltwater is immune to its corrosive powers. The greater the salinity, the faster the corrosion.

What is a good size boat for the ocean?

If you are planning on traversing the oceans and seas where the waves and waters can get fairly rough, you should consider looking at boats 30ft and up. A boat this size will better handle the choppy and unpredictable water and currents, as well as longer trips offshore.

Can I use my Bass Tracker in saltwater?

A bass boat is capable of going in saltwater, but it’s best to keep your bass boat in freshwater because many components of your boat’s system were not designed for the corrosive nature of saltwater boating. The bottom line is I would NEVER take a bass boat into saltwater and definitely out into the ocean.

Why are most saltwater boats outboards?

The outboard has also become favored over the inboard in saltwater because of the ease of engine replacement and repowering ability. When dealing with saltwater and a lot of use of your boat, the outboard is much easier to replace when it comes to that time.

How long will a freshwater trolling motor last in saltwater?

Generally, saltwater motors use non-corrosive metal and materials to guard against the effects of saltwater. Nonetheless, with protective measures and regular rinsing, you can use a freshwater motor in saltwater for up to 7 years.

What part of boats are affected by saltwater?

Salt water attacks everything on boats and if left to it’s own device, things start falling apart, breaking down and leaking. The most important area to keep clean of salt water and moisture is your engine bay and bilge area.

Whats easier to maintain inboard or outboard?

Because the entire engine is outside the boat, an outboard is easier to service than an inboard. Servicing the inboard requires working under an engine hatch, often in pretty cramped confines. When an outboard is damaged or simply worn out, it is relatively easy to re-power the boat with a new outboard.