How do you open a Brinks lock if you forgot the combination?
Table of Contents
How do you open a Brinks lock if you forgot the combination?
To reset the Brinks 165-50054 padlock initially, turn the dials to 0000 and open the lock. Turn the lock over and push the reset lever up and to the left. Change the combination. Once you have your chosen combination on the dials then put the reset lever back down.
How do you find the combination on a Brinks safe?
How to Get a Combination for a Brinks Fire Safe
- Locate the model and serial numbers on your safe and write them down.
- Write down the key number for your safe.
- Contact Honeywell customer support at 877-354-5457.
How do you open a Brinks Home Safe?
Turn the dial counterclockwise to the fourth combination number. Insert the key, and turn clockwise to unlock the safe.
How do you open a Brinks 4 digit safe?
Brinks Turning Sequence
- Turn the dial to the RIGHT (CLOCKWISE) three times to clear prior settings.
- Start the dial on 0 (ZERO).
- Turn the dial to the RIGHT, passing your first combination number FOUR (4) times and stopping at that number on the FIFTH time around.
Why won’t my Brinks lock open?
The most common is that the lock cylinder won’t properly turn with the key inserted. If you are, then the lock’s internal parts may be frozen from cold or stuck because of rust or grime. These same causes can also cause the lock shackle to open and close improperly, or prevent the open shackle from rotating freely.
How do you change the combination on a Brinks combination lock?
Instructions for Resetting Brinks 7551 Combination Lock
- Open the lock using the current combination.
- Pull the shackle up and swing it 180 degrees, and then depress it and hold it down.
- Rotate the dials until the new combination aligns with the arrow.
How do you break into a safe without a key?
Insert a screwdriver into the keyhole and turn it to break the lock. Place the safe on a flat surface and insert a flathead screwdriver into the keyhole. Rotate the screwdriver counterclockwise over and over until you hear or feel the locking mechanism break open. Then, remove the screwdriver and open the safe.
What do you do when your combination lock won’t open?
Please try resetting the lock again by following the instructions below:
- Place lock in the open position.
- On the back of the lock, slide the reset lever into the “up” position.
- Insert the shackle into the lock and squeeze firmly twice to “clear” it.
- Pull up on the shackle to open the lock.
- Enter your new combination.
Can you get a new combination for a Brinks safe?
In many cases, a home fire safe requires both a key and combination code. If you have lost either, you can get a replacement from the manufacturer. The company that manufactures the Brinks fire safe is now known as Honeywell and is based in California. With the right information, getting a new combination for your safe should be a snap.
How do you unlock a brink safe from the outside?
Turn the dial clockwise one time past the third combination number, and stop at the number the second time around. Turn the dial counterclockwise to the fourth combination number. Insert the key, and turn clockwise to unlock the safe. Sisco now owns the Brink fire safe product line.
Where are Brinks fire safes made?
Image of valuables and cash that can be protected in fireproof safe. In many cases, a home fire safe requires both a key and combination code. If you have lost either, you can get a replacement from the manufacturer. The company that manufactures the Brinks fire safe is now known as Honeywell and is based in California.
What happens if you lose a Brinks fire safe?
In many cases, a home fire safe requires both a key and combination code. If you have lost either, you can get a replacement from the manufacturer. The company that manufactures the Brinks fire safe is now known as Honeywell and is based in California.