Q&A 

How do I get rid of input display on my Sony TV?

Author

How do I get rid of input display on my Sony TV?

Hide the input.

  1. On the supplied remote control, press the HOME button.
  2. Select Settings.
  3. Under General settings, select Watching TV.
  4. Under Watching TV, select External inputs.
  5. Under External inputs, select Manage inputs.
  6. Select the input.
  7. Select Display.
  8. Under Display, select Hide.

What do you do when your TV says no signal?

Most problems can be resolved by sending a refresh signal to your Spectrum Receiver. You an also try to reboot your receiver by unplugging the power cord and allowing at least 60 seconds before plugging it back in. Allow at least 20 minutes for the receiver to fully recover and then turn it back on.

How do I get rid of the HDMI sign on my TV?

Can I turn off or disable the Info Banner display on my TV?

  1. On the supplied remote, press the HOME button.
  2. Select Settings.
  3. Select Preferences.
  4. Select Setup.
  5. Select Info Banner.
  6. Select Hidden. If you want less information to appear on your screen, select Small.

How do I get rid of channel display on my TV?

Remove Channel Information Displayed on the Screen

  1. On the supplied remote control, press the TV FUNCTION button, if available.
  2. Press the DISPLAY button. Note: You may need to press the DISPLAY button repeatedly to remove all the displayed channel information on the screen.

How do I get rid of audio only on my Sony TV?

Audio Only works only when the input source is TV, and your TV is receiving a broadcast signal. To exit audio only mode, press any button. When you exit audio only mode, the Audio Only option is automatically reset to Off.

How do I reset my Sony TV?

1 Factory Reset

  1. Unplug the TV and leave it unplugged for one minute.
  2. Plug the TV back in.
  3. On the remote control, press and hold the UP ARROW button.
  4. While holding down the UP ARROW button, press and release the POWER button on the television.
  5. Depending on the model, RESET may flash on the screen.

How do I reboot my TV?

Reset the TV with the remote control

  1. Point the remote control to the illumination LED or status LED and press and hold the POWER button of the remote control for about 5 seconds, or until a message Power off appears.
  2. The TV should restart automatically.
  3. TV reset operation is complete.

Why is my TV suddenly saying no signal?

Check the cable connections between the TV and your video device or receiver. Change the channel or try a different input device or movie. The received signal may be weak. If your TV uses a cable or satellite box, you may need to contact your service provider for further assistance in improving the signal strength.

How do I get rid of the channel display on my Samsung TV?

Simply highlight it, press the down directional button on your TV remote, and then select Remove > Disable. Then, you will not see Samsung TV Plus from the app launcher and all Samsung TV Plus channels will be deleted at once.

How do I get rid of audio only on my TV?

Playing TV audio only

  1. The picture turns off in about five seconds.
  2. Audio Only works only when the input source is TV, and your TV is receiving a broadcast signal.
  3. To exit audio only mode, press any button. When you exit audio only mode, the Audio Only option is automatically reset to Off.

How do I turn audio description off?

Audio descriptions won’t turn off

  1. From your device’s home screen, select Settings.
  2. Select General.
  3. Select Accessibility.
  4. Select Video Descriptions.
  5. Select Video Descriptions again to turn it off.
  6. Return to the Netflix app and begin playing a movie or TV show.

How do I diagnose a problem with my Philips TV?

The following steps will help you diagnose whether your issue is a problem with the TV or the device broadcasting the picture. Step 1: Power cycle the TV. Unplug the power cord from the outlet or the wall (whichever is more accessible). Hold the power button on the side of the TV down for 3-5 seconds.

How do I know if my TV has the correct input?

Display the correct video input. Check where the video input is plugged in on your television and confirm with your television’s “Input” settings. Check if the television is on channel 03 or channel 04 or if the input should be set to CATV, AV1, AV2, Video 1, HDMI or other similar video inputs.

How do I Reset my TV to a different power cycle?

Some Televisions also have an option to ‘Soft Power Cycle’ in the menu. To access this press the menu button and choose System > Reset & Admin > Soft Power Cycle. Step 2: Verify the cord is securely connected to the video device and the TV. If a cord comes loose it could cause a display issue.

How do I know if my TV screen needs replacing?

If your screen has lines, bring up the TV menu. If the lines run through the menu, or if the screen is cracked, your panel needs to be replaced. This is not a cost effective repair. If you have an extended warranty and there are lines in the panel, the warranty company will likely replace your TV.