Trending 

What is OCAP on Spectrum cable box?

Author

What is OCAP on Spectrum cable box?

OpenCable Application Platform
O.C.A.P. stands for OpenCable Application Platform, and it is the software that runs on your cable converter/DVR hardware.

How do I reset my Spectrum cable box?

Unplug your Spectrum receiver for 60 seconds and then plug it back in….Manually Reboot Your Receiver

  1. Your cables are connected securely.
  2. The coax cable is connected to the cable outlet on the wall.
  3. The HDMI cable is connected to the HDMI connection on the TV (if applicable).

What does it mean when cable box says DUI?

DUI or DMI – This code is associated with the video interface that has to negotiate with the TV before it displays. The code may briefly appear on the cable box when the TV is first powered on but should then disappear.

Why is my Arris cable box not working?

Carefully unplug the Set-Top Box power cord from the electrical outlet or power strip if you’re using one. Wait 30 seconds while the Set-Top Box completely shuts off. Plug the power cord back in. The Set-Top Box will automatically reboot – this may take a few minutes.

What does Alt mean on my Spectrum box?

While it’s trying to detect a signal coming from the cable input, the box displays Alt, which means “wait.” If the cable box doesn’t progress past the Alt message after five minutes, it means the box can’t detect a signal from the cable.

How do I fix the spectrum not tunable?

If you’re still missing channels, try rebooting your Spectrum Receiver. Unplug the receiver and wait at least 60 seconds before plugging it back in. Note: If you use a CableCARD or personal video recorder device (such as TiVo), you may need a tuning adapter to get all channels.

Why is my Spectrum box not working?

Most problems can be resolved by sending a refresh signal to your Spectrum Receiver. You an also try to reboot your receiver by unplugging the power cord and allowing at least 60 seconds before plugging it back in. Allow at least 20 minutes for the receiver to fully recover and then turn it back on.

How do I get my Spectrum cable box to work?

For advanced support:

  1. Turn off your receiver and TV.
  2. Remove the HDMI cable.
  3. Unplug the power cord from your TV and plug it back in (preferably directly into a wall outlet).
  4. Unplug the Spectrum Receiver and turn the TV on.
  5. Reconnect your HDMI cable and re-plug the Spectrum Receiver and turn it on.

What does 8888 mean on cable box?

When the display on your Set-top box shows 8888 there is a malfunction with the box and it may need to be replaced. The equipment can be exchanged at your local HTC retail location – or you may contact HTC Technical Support for a repairman to come out and replace the box.

Why does cable box say Hunt?

If you see the “HUNT” error, it is due to low cable signal. To resolve this issue, please check and secure your cable connections from your TV Box to the outlet.

How do I reset my Arris cable box?

Most Arris routers can be reset using the Reset Button.

  1. Locate the Reset Button on your Arris modem or router (typically found on the back of the device).
  2. When you locate the button, press and hold it for at least 15 seconds.
  3. Wait for the reset to complete—this process can take a few minutes.

How do I reset my Arris TV box?

Reset Arris Gateway Whole Home PVR System – Hamilton

  1. On the back of the Arris Portal there is a Reset button.
  2. Press and hold Reset for 6 seconds, and then release.
  3. If the problem persists, locate the Reset button on the back of the main Arris Gateway unit.
  4. Press Reset once, and then release immediately.

What does navien error code E002 or E003 mean?

Navien error code E002 means there is low pressure on the heating side. Navien error code E002 can be caused by low water pressure, so you have to ensure that the unit receives enough water. You may also need to restart the unit to fix this error code. Navien error code E003 indicates a failure in the ignition of the unit.

What does E-3 mean?

Sorry for the terrible question, but how do you define E-3, which is used in the calculators to indicate that the first 3 decimals in the number are not displayed? I need to write in my thesis something like: “Please, pay attention that the values are shifted by 3 decimals”.

What does E003 mean on my Kenmore Elite washer?

In the last week I’ve twice had it give no hot water. I inspected the unit and it said “E003” which means “ignition failure”. Unplugging and plugging it back in got it working again and cleared the code.

What does E011 mean on a navnavien water heater?

Navien error code E011 means there is high pressure on the heating side. This error code may be fixed by switching off the unit, draining the water to release the pressure, and switching it back on. If the error persists, check the condition of the sensor.