What type of fittings should be used with polyethylene pipe?

What type of fittings should be used with polyethylene pipe?

PVC fittings are plastic based fittings commonly used with Polyethylene Tubing. Galvanized Steel fittings are non-corrosive and are rust-resistant which works well with water applications.

Can you use hose clamps on poly pipe?

Barbed Poly Fitting Installation Slide a hose clamp over the end of the pipe. The hose clamp size must match the size of the tubing. Dip one end of a barbed poly fitting in a water-based lubricant. Slide the hose clamp toward the fitting until the end closest to the fitting is 1/4 inch away from the end of the tubing.

What do the stripes on poly pipe mean?

Pipe-with-the-Stripe® (PWS) polyethylene pipe features a coloured stripe extruded into the pipe wall as a permanent reminder of the grade and pressure rating. PWS pipe is ID-controlled and is typically connected using insert fittings and gear clamps.

Can poly pipe be glued?

Unlike other plastic piping, poly pipe connections do not use glue to solvent weld pieces together. Instead, two specially designed fitting types seal poly connections using friction. Both types have specific installation instructions to ensure they hold connections together under pressure.

What kind of clamps do you use for poly pipe fittings?

The perfect clamps to attach any poly fitting to poly pipes. Made out of stainless steel to ensure durability. Find all the clamps and accessories needed for your poly pipe connections and fittings. Extra strong stainless steel clamps come with a stainless steel screw to create a durable hold for your poly pipes.

How do you cut PVC tubing for a hose clamp?

Cut the required length of tubing from a polyethylene pipe roll with a sharp-bladed utility knife. Make sure the cut is straight. Slide a hose clamp over the end of the pipe. The hose clamp size must match the size of the tubing.

How do you attach barbed pipe clamps?

Put the pipe clamps onto the pipe before inserting the each barbed fitting into the pipe. Insert one end of the fitting into the pipe, pushing it in as far as it will go.

How do you remove a compression fitting from a poly pipe?

Slide an end of a piece of poly pipe into the loosened side of the compression fitting. Slide the pipe until you feel the pipe bottom-out inside the fitting.