What should I put in my pool when I first fill it up?

What should I put in my pool when I first fill it up?

Chemicals Needed for Pool Start Ups

1. Stain & Scale Preventer.
2. Granular Shock Chlorine.
3. Chlorine Tablets.
4. pH Increaser and/or pH Decreaser.
5. Alkalinity and/or Calcium Increaser.
6. Cyanuric Acid (Stabilizer)
7. Algaecide and Clarifiers if needed.
8. Complete Test Kit or Test Strips.

Do you need to shock a pool when you first fill it?

At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. Now it’s time to keep the water hardness in check, otherwise known as alkalinity.

What chemicals do I put in my pool when I first open it?

We recommend that you take an inventory of the following:

• Chlorine Tablets & Chlorine Stock.
• pH Increaser & Decreaser.
• Alkalinity & Calcium Increaser.
• Cyanuric Acid or Stabilizer.
• Algaecides, Clarifiers, Enzymes.
• Test Kit Reagents or Test Strips.
• Stain Removers.

How do you set up pool water for the first time?

Steps:

1. Turn on the pool pump and filtration system.
2. Test the pool water for pH, chlorine and total alkalinity.
3. Adjust the pH until it is between 6.8 and 7.2.
4. Add a sequestering agent according to package directions.
5. Allow two days for the pool balance to settle.

How do you treat an above ground pool for the first time?

Top Tips for Maintaining an Above Ground Pool

1. Install a Sump Pump in Your House.
2. Test the Chlorine Level.
3. Do Weekly Shock Treatments.
4. Test the pH Level.
5. Run the Pool’s Pump at Least Eight Hours a Day.
6. Regularly Clean and Replace the Filter.
7. Regularly Clean Out the Pump and Skimmer Baskets.
8. Vacuum Often.

What to do with pool after filling?

After you fill your pool with water, it’s essential to complete the following steps: Test the water; balance the pH, total alkalinity, and calcium hardness; check for metals; and add a clarifier, sanitizer, and algaecide. Once the above steps are complete, your pool should be safe for recreational use.

How do I start my above ground pool for the first time?

1. Step 1 – Clear off the water, debris and anything else from the pool cover.
2. Step 2 – Remove the pool cover.
3. Step 3 – Pull the winter plugs and accessories out.
4. Step 4 – Top up the water in your pool.
5. Step 5 – Reinstall the pool ladder.
6. Step 6 – Prepare the pool filtration system.
7. Step 7 – Power your filtration system up.

How soon can you swim after filling pool?

How soon after filling a pool can you swim? After the pool is full it usually takes up to 1 week before the pool is ready for you to swim. The shortest timeline we have seen for swimming after filling a plaster pool is 5 days.

How long after filling a pool Can you swim?

Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you’ll only be adding liquid chlorine, it’s generally safe to swim after about 4 hours or until levels are 5 ppm or lower.

What to do after filling a pool?

What Do You Do After an Above Ground Pool Is Filled With Water?

1. Step 1: Learn about how to prevent drowning and pool chemical injuries.
2. Step 2: Turn on the filter.
3. Step 3: Vacuum and skim off debris.
4. Step 4: Test the water, and then test it again.
5. Step 5: Enjoy your pool, but safely!

Do I add chlorine or acid first?

You should never add chlorine and muriatic acid at the same time. The muriatic acid will react with the chlorine in your pool and create a deadly gas called hydrochloric acid. You need to wait for a minimum of 30 minutes, after you add the acid, before adding any chlorine to your pool.

What is the first thing to do when opening a pool?

Your first step when opening your pool is to test your water, because the results of your water tests will determine what pool startup chemicals you need to use. It’s best to test your pool’s water in several spots a couple of feet below the surface of the water.

What should you do after you fill your above-ground pool?

“Check the chlorine and the pH, or the bromine,” Hlavsa says, when asked about what you should focus on after their above-ground pool is filled. “The chlorine is what kills or inactivates the germs in the water, and the CDC recommends one to ten parts per million.

How do you prepare a pool for swimming pool cleaning?

Brush the entire pool surface thoroughly at least twice daily to remove all plaster dust. Again, routine brushing is critical to a long-lasting, beautiful pool finish. Test pH, Alkalinity and Calcium Hardness and repeat 1st day, Steps 1 through 5. Pre-diluted chlorine may now be added to achieve 1.5 to 3 ppm.

How do I treat my pool water?

The first step when treating your pool’s water is to adjust the pH. This is important because pool chemicals are formulated to work at specific pH levels. If the pH isn’t where it needs to be, any other chemicals you add won’t give the right results. Adjust the pH to between 7.4 and 7.6 before proceeding to the next steps.