What does it mean when your car radio says locked?

What does it mean when your car radio says locked?

A lockout code protects against radio theft. If a thief disconnects the radio, the code locks the radio up, rendering it useless. However, it’s not much of a safeguard because the thief usually doesn’t know that the code has been tripped until he powers up the radio after he has removed it from the vehicle.

How do you take theft lock off radio?

Cars with PassLock or Theftlock

1. Use an original key (not a copied one) and insert it into the ignition.
2. Turn the key into the “On” position.
3. Leave the key in this position for 10 minutes until the “Theft System” light stops flashing and goes off.
4. Flip the key into the “Off” position and leave it there for five seconds.

What is a radio unlock code?

A car radio code is a short string of numbers associated with a security feature found in some head units. Its purpose is to prevent theft by rendering a stolen head unit useless when it’s disconnected from the battery. In either case, you must enter the code to get the head unit working again.

How do I unlock my radio without the code?

1. To do this, You have to turn your ignition to the ON position.
2. Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio.
3. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.

How do I unlock my Pontiac radio?

Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.

How do you unlock a car radio that is locked?

Without the Unlock Code

1. Call your car manufacturer directly. Your car manufacturer’s phone number is in your owner’s manual. Ask to be connected to the support department.
2. Enter the code and unlock your stereo. Use the code you received from the manufacturer to unlock and and activate your car stereo.

How do you unlock a Pontiac radio?

How can I get the code to unlock my car stereo?

How to Find the Radio Code to Unlock a Car Stereo

1. Check Your Owner’s Manual. The best place to locate a radio code is in the owner’s manual of your car.
2. Visit the Manufacturer’s Website.
3. Visit your Local Dealership.
4. Contact a Local Automotive Audio Installation Center.

Do all car radios need a code?

Most car stereos come equipped with an anti-theft radio code. You will need to enter the anti-theft code into your radio in order for it to resume functioning. If your car radio is locked, there are simple steps that you can take to unlock it.

Can I get radio code from VIN number?

The code is located on a card that comes with the original purchase of the vehicle, which we don’t have. A person can call the dealership with the serial number of the radio and Vehicle Identification Number (VIN) of the vehicle and ask for the radio code.

How do I unlock my HHR radio?

To unlock the Chevy HHRs radio, turn the car on and make sure the radio is switched off. Then locate the minute button on the radio’s interface. Click the minute button and wait until a code that shows the numbers 000 appears on the radios screen. Click the minute button again until one zero disappears.

How do you unlock a radio?

Locate the anti-theft/unlock code. Most cars have a special anti-theft radio card that is included with the owners manual packet containing the unlock code and serial number. Some cars also have the code in the car manual or inside the glove compartment. You will need this code in order to unlock your car radio.

How do I unlock the radio on my GMC Sierra?

Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.

How do I unlock my car radio with a code?

Using Your Radio Retrieval Code to Unlock Your Radio Press the hour button on the radio until the first 2 numbers of the code appear. Hit the minute button to bring up the last 2 digits of your retrieval code. Press the AM/FM button to unlock your radio. Leave your battery on for 1 hour to clear an “INOP” message.

How to get a GMC radio code for free?

Many dealers will give you your radio code for free, while others may charge a small fee. If your dealer is charging a larger fee, consider calling another dealer or doing a Google search for sites offering GMC Radio codes. They usually charge a small (around $10) fee.

How do I know if my GM Radio is locked?

The digital display will read “LOC” if the radio is locked. If you don’t see the letters “LOC” but your radio isn’t working, the issue may lie elsewhere. Take your car to a qualified GM mechanic or car radio technician to have them diagnose the source of the problem.