Is there a certain way to put on a serpentine belt?
Table of Contents
Is there a certain way to put on a serpentine belt?
Serpentine belt replacement is easy because today’s automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just rotate the tensioner, remove the old belt and install a new one.
What does the idler pulley do?
Idler pulleys are engine pulleys that are responsible for guiding and tensioning the engine drive belts. The idler pulley is meant to provide another smoothly rotating point for the engine belt to loop around, so that the desired routing can be achieved.
What tools do you need to put on a serpentine belt?
Tools/Supplies Needed:
- ratchet and socket set.
- torque wrench.
- new replacement belt.
- new tensioner.
- new pulley.
- wrench set.
- jack and axle stands or ramps.
Is the tensioner pulley supposed to move?
The tensioner arm should move smoothly and freely. Solution: If you notice a binding, sticking or grinding tensioner arm, the tensioner should be replaced.
Is the serpentine belt the same as the AC belt?
The AC belt is probably the most simple component of a vehicle’s AC system, but still a very important one. A serpentine belt is flat and ribbed, and serves to connect several components, while a V-belt is narrower, shaped like a V, and connects only two components.
How do you replace a serpentine belt without a tensioner?
If your vehicle doesn’t have an auto tensioner, look for an alternator bracket and loosen the bolts in it instead. Next, get a new serpentine belt with the same width and number of ribs as the old one, and route it through the pulley system.
How do you replace a serpentine belt on a Ford Ranger?
To replace a serpentine belt, start by locating the old belt at the front or side of your engine bay. Then, use a wrench to relieve the auto tensioner so you can pull the belt off of the pulley system. If your vehicle doesn’t have an auto tensioner, look for an alternator bracket and loosen the bolts in it instead.
What does a serpentine belt do on a truck?
If you didn’t already know, the serpentine belt or drivebelt on your truck’s engine is very important in the proper operation of the engine. It drives critical engine components like the alternator, power steering pump, and water pump as well as accessories such as the air conditioning compressor.
Where do I find the serpentine belt routing diagram?
Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run.