Is a rake and fascia the same thing?

Is a rake and fascia the same thing?

Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Fascia—A decorative board extending down from the roof edge either at the eave or at the rake. Rake—The slanting edge of a gable roof at the end wall of the house.

Where is the rake board on a house?

The rake board covers the top edge of the siding where it meets the roof, or soffit if there is an overhang on the gable end, and prevents rain from running behind it. Rake boards are installed on the gable ends of brick houses to cover the exposed top edge of the brick.

What is the difference between fascia and barge boards?

Bargeboards and fascia boards are essentially the same thing. They are both long, straight boards that run along the lower edge of the roof. However, fascia boards run horizontally, carry the gutters and support the bottom row of roof tiles. Bargeboards run diagonally and are located at the gable end of a property.

What is fascia board called?

The fascia board is the one mounted at the point where the roof meets the outer walls of the house and is often called the ROOFLINE. However most people refer to it by the name of the main board that carries the gutter – the fascia or fascias.

Are eaves and soffits the same thing?

Remember that an eave is the lower edge of a roof which projects beyond the face of the wall. So in summary, an eave is part of a roof system and a soffit, in that context, is part of the eave. Clearly, eaves and soffit are two different parts of the same structure.

Does drip edge go on rakes and eaves?

A drip edge should be installed on the eaves and rakes of the roof, flush with the decking and fascia. On eaves, the drip edge is installed directly to the deck with underlayment installed over it for proper water shedding. On rakes, the underlayment is installed over the drip edge.

What is the difference between fascia and flashing?

Fascia is the decorative finish to the edge of your roof. On most homes you will find the gutter attached to the fascia. Flashing. Keeping up with the theme of weatherization, flashing is the epitome of it.

What is the fascia on a house?

The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished. Your gutter sits atop the facia board. The fascia is also known as a “transition trim” between the home and the roofline. Your soffit and fascia protect your roof and allow ventilation for your home.

What are the boards on the outside of a house called?

Definition of Fascia board or fascia trim: The horizontal board running along the outer edge of a soffit, typically covered or mostly covered by a gutter on modern homes, is the fascia board.

What is the best material for fascia boards?

Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.

Are fascia and soffit the same?

The soffit is part of the overhang where your roof meets your siding. The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished. Your gutter sits atop the facia board. The fascia is also known as a “transition trim” between the home and the roofline.

What is the difference between soffits and fascia?

An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.

What is a rake board?

Rake board. Fascia/rake board-The visible flat front board that caps the rafter tail ends and encloses the overhang under the eave that runs along the roof edge and at the edge of the roofing at the gables. The gutter is usually attached to this board at the eaves . Prepare the rake boards in much the same way you did the rafters.

Is fascia board required?

Fascia Board, General Maintenance, Roofing Construction / By Mike Knapp The short answer to this question is, “Yes!” They are undoubtedly necessary because they help cap the edges of the rafters, hold gutters in place to help ensure proper water drainage, and more. Let’s look a little more deeply.

What are fascia boards for?

The fascia board is the long, straight board that runs along the lower edge of the roof. The fascia is fixed directly to the lower ends of the roof trusses and usually does all the work of supporting the lower edge of the bottom row of tiles. The fascia board also carries all the guttering.