How do you use a Brinks combination lock?

How do you use a Brinks combination lock?

How to Open a Brinks Lock If You Have the Combination

  1. Spin the dial a couple of times to reset the lock.
  2. Turn the dial four full clockwise turns.
  3. Rotate the dial counter-clockwise twice.
  4. Rotate the dial clockwise once and stop on the third number of the combination on the second turn.

How do I reset a Brinks combination lock?

Answer: When you first take the lock out of the package, the combination is, “0000.” Enter this combination and then slide the notch in the back of the lock up and to the left. Once you do that, set your new combination, then slide the notch to the right and down. Now your Brinks Lock is reset.

How do you reset a Brinks combination lock?

How do I Reset my Master Lock combination?

Changing a Precision Dial Lock Open the lock using the old combination. Insert the reset tool into the shackle hole. Turn the reset tool so that the Master logo is facing you. Rotate the dial clockwise 3 times to clear the old combination. Enter your new combination. Remove the reset tool to lock it. Write down the combination in a safe place.

How do you reset the combination on a lock box?

Quick Answer. To reset a combination lock, open the lock, turn the padlock, hold down the top half and enter the new combination. Keep in mind that all combination locks are different, and not all locks can be reset, so check the manufacturer’s instructions for model-specific details on resetting the lock’s combination.

How do you reset combination bike lock?

Unlock your bike lock using your current combination, and separate the cable from the lock housing. Flip the reset lever on the end of the lock housing up 180 degrees until it is flat against the head of the lock. Other locks may have a small red button. Depress this button to reset the combination.