How do you remove a Chevy ignition without the key?

How do you remove a Chevy ignition without the key?

Take your screwdriver and insert it into the ignition lock cylinder. Turn it as far round in a clockwise direction that you can. Then pull the paperclip to the right as much as you can. You should then be able to slide the switch out easily.

How do you remove a cylinder lock without the key?

How to Remove Door Lock Cylinder without Key in 4 Steps?

  1. Step 1: Locate the position of the lock and unscrew the front side.
  2. Step 2: Remove the screw inside the lock’s body.
  3. Step 3: Turn the cylinder cam into a 12 o’clock position.
  4. Step 4: Eject the lock from the cavity of the door.

How do you drill out a ignition cylinder?

How to Drill Out Ignition Lock Cylinders

  1. Test fit a drill bit in the lock cylinder.
  2. Lock the drill bit into the drill chuck and tighten the chuck.
  3. Drill a starter groove into the lock cylinder.
  4. Increase the drill speed to the highest setting and drill out the lock cylinder.

How do you reset the anti theft system on a 2001 Chevy Cavalier?

Place key in the ignition and turn to on position and all lights and guages come on. Anti-theft lights for a couple of seconds and goes out. Turn to start and all the guages and lights in the dash go off and out.

How do you bypass an ignition immobilizer?

You can bypass the immobilizer by placing the key in keyhole hence deactivating the car’s immobilizer to remote start. The added security with Mobokey allows the security to be activated as soon as the phone moves away from the car, so you don’t have to worry about car security.

How can I start my car without the ignition switch?

In order to start it without a key, one needs to bypass the ignition lock which should only be done when you lost your key. It can only be done by connecting ignition cord to the battery cord followed by touching the starter cord to the connection.

How do you pop an ignition with a screwdriver?

Are you satisfied with our tutorial on how to break ignition lock with screwdriver? With these steps, you can punch an ignition with a screwdriver and start your car for temporary use. This life hack will help you in times of emergency and when you are low in your budget for car repairs.