Table of Contents
How do you identify a Sligh clock?
*The Model number for a Sligh clock is generally found on a sticker or brass plate attached to the inside of the front door or a sticker attached to the upper inside back of the clock which can be seen when you open the upper left hand side door. The model number starts with a 4-digit number such as 0824 or 0929.
Does Sligh still make grandfather clocks?
Sligh and Howard Miller clocks, also sold at Teerman’s, earned a reputation as high-quality grandfather clocks. Buzz Miller, president of Howard Miller Clock Co. in Zeeland, still sees clock-making as a viable business.
What is a Sligh clock?
A Sligh grandfather clock represents a brand of fine furniture that was made from 1968 to 2005 in Holland, Michigan. You can find a wide selection of Sligh grandfather clocks for sale on eBay.
How do you start a Sligh grandfather clock?
To set your Grandfather clock, move the minute hand counter clockwise, the chimes should not play. If for some reason the chimes should begin to play when setting the clock, pause until they complete themselves before continuing. Wait until chimes stop, and turn the minute hand counter clockwise to the desired time .
Is Sligh clock company still in business?
Sligh ceased all clock manufacturing in 2005, but they remain a high end manufacturer of furniture products. All Sligh mantle and wall clocks are repaired in our national service center location.
Is Sligh clocks still in business?
How do you wind a Sligh grandfather clock?
To wind the Grandfather clock, insert the winding crank into each of the holes in the dial. Turn the crank in a clockwise direction. The Grandfather clock is equipped with an automatic limit device, which prevents weights from being raised too far. When winding, take extra care to prevent cables from crossing.
How do you repair a grandfather clock?
1 Answer. Repair grandfather clock chimes by adjusting the clock’s minute hand. Stop the pendulum as soon as the grandfather clock begins to chime at the wrong time. Write down the time. Grasp the minute hand with one hand. Use pliers to take hold of the nut on top of the minute hand. Do not apply to much pressure or the nut will scratch.
What are the parts of a grandfather clock?
Grandfather clock. A grandfather clock (also a longcase clock, tall-case clock, grandfather’s clock, or floor clock) is a tall, freestanding, weight-driven pendulum clock with the pendulum held inside the tower or waist of the case. Clocks of this style are commonly 1.8–2.4 metres (6–8 feet) tall.
What is a grandmother clock?
Grandmother Clocks are usually considered to be a smaller floor clock measuring 80 inches or less. Grandmother clocks are perfect for smaller rooms, hallways, landings and smaller foyers.